2. The console port can be used for which of the following? (Choose three.)
• debugging.
• password recovery.
• routing data between networks.
• troubleshooting.
• connecting one router to another.

3. Which of the following describes the function of a WAN?
• connects peripherals in a single location.
• connects multiple networks in a single building.
• provides connectivity on a LAN.
• provides connectivity over a large geographic area.

4. An internetwork must include which of the following? (Choose three.)
• switching.
• static addressing.
• IETF standardization.
• dynamic or static routing.
• consistent end-to-end addressing.

5. ABC Company just purchased three new routers to start their company network. Which items are needed to establish a terminal session between a PC and the router for the initial configuration? (Choose three.)
• straight-through cable.
• terminal emulation software.
• rollover cable.
• RJ-45 to DB-9 connector.
• V.35 cable.

6.Terminal emulation software, such as HyperTerminal, can be used to configure a router. Which of the following HyperTerminal options shown in the graphic are correctly set to allow configuration of a Cisco router? (Choose three.)
• bits per second.
• data bits.
• parity.
• stop bits.
• flow control.

7. Which of the following devices are used in the construction of a WAN? (Choose three.)
• hubs.
• routers.
• communication servers.
• transceivers.
• modems.
• multi-port repeaters.

8. Which of the following are functions of RAM? (Choose three.)
• contains startup configuration file.
• stores routing table.
• holds fast switching cache.
• retains contents when power is removed.
• stores running configuration file.

9. Why is a console connection to a router or switch preferred when troubleshooting? (Choose two.)
• can be accessed remotely.
• does not depend on network services.
• displays startup and error messages by default.
• does not require special components.

10. Which basic components do a router and a standard desktop PC have in common? (Choose three.)
• CPU.
• hard drive.
• input/output interfaces.
• keyboard.
• monitor.
• system bus.

11. During the initial configuration of a 2600 series Cisco router, which cable is required for connecting a PC to the console port?
• twisted.
• crossover.
• rollover.
• straight.

12. A router is composed of many internal components. Which of the following components stores a copy of the router’s configuration file?
• metal-oxide memory.
• read only memory.
• flash memory.
• non-volatile random access memory.

13. What contains the instructions that a router uses to control the flow of traffic through its interfaces?
• packet configuration.
• configuration files.
• flash memory.
• internal components.

14. Several Ethernet hosts on a LAN need the gateway services of a Cisco 2500 series router. Which of the following would be needed to physically connect a router to all of the hosts on the LAN? (Choose two.)
• a crossover cable between the transceiver on a router and a switch.
• a crossover cables between a switch and hosts on a LAN.
• a straight-through cable between the auxiliary port on a router and a switch.
• a rollover cable between the console port on a router and a switch.
• straight-through cables between a switch and hosts on a LAN.
• a straight-through cable between the transceiver on a router and a switch.

15. Which router component holds the configuration file when power is lost?
• volatile random access memory.
• read only memory.
• non-volatile random access memory.
• flash memory.

16. Which of the following layers of the OSI model are incorporated in WAN standards? (Choose two.)
physical layer.
• application layer.
• transport layer.
• data link layer.
• session layer.

17. Which of the following are true regarding router interfaces? (Choose three.)
• provide temporary memory for the router configuration files.
• connect the router to the network for packet entry and exit.
• can be on the motherboard or a separate module.
• hold the IOS image.
• connect the router to LANs and WANs.

18. Which of the following tasks can be accomplished through a management connection on a router? (Choose three.)
• troubleshooting problems.
• monitoring the system.
• capturing LAN data packets.
• configuring the router.
• routing data packets.

19. What do routers use to select the best path for outgoing data packets?
• ARP tables.
• bridging tables.
• routing tables.
• switching tables.

20. Which of the following are functions of NVRAM? (Choose two.)
• stores the routing table.
• retains contents when power is removed.
• stores the startup configuration file.
• contains the running configuration file.
• stores the ARP table.

21. Select the statements that correctly describe flash memory in a 2600 series router? (Choose two.)
• holds the startup configuration by default.
• can be upgraded with single in-line memory modules.
• stores Cisco IOS software images.
• stores routing table information by default.
• maintains the only copy of an IOS image after the router is booted.